How do i manually network 2 wired computers and 2 wireless computers?

i need to manually network 2 wired computers and 2 wireless computers. when i run the network setup wizard i get an error that says to do it manually. Can someone give me the step by step to do this? starting with the first computer and so on. Thanks!By the way i have already confirmed the workgroup is the same on all computers.

How do i manually network 2 wired computers and 2 wireless computers?antivirus

you have a total of four computers, which you want to connect so each one can "talk" to each other?

you need a wireless switch; you plug in the two networked ones to the switch, the others will connect wireless to the switch.

usually, the switch would support "DHCP" (kind of plug%26play) - simply set the network settings to something like "attain automagically". If the switch doesn't support DHCP, you will have to set the IP addresses manually. Each computer requires a unique IP address formed like: 192.168.100.x and a subnet mask like 255.255.255.0.

The subnet mask will be the same on all four computers, the ip address will change in the last digit, like 192.168.100.1, 192.168.100.2, 192.168.100.3 and 192.168.100.4 (again, the subnet mask remains the same).

Try this out with the wired computers, and see, if they can "see" each other. (select start, run, type in cmd, a black command line window opens, then enter "ping 192.168.100.1" (or .2 or .3 or .4) and see what happens. If the answer is something like "timed out" you have a problem, if the answer is number you are set :))